Clean Room Systems / Product
Product Detail
Composite handmade cleanroom panel using glass magnesium board and rock wool for stronger custom panels, fire-conscious layouts and factory-prepared openings.
| Product family | Handmade cleanroom sandwich panel |
| Production method | Handmade modular fabrication with four-side reinforced metal keel |
| Core material | Glass magnesium board plus rock wool composite core |
| Typical thickness | 50, 75 or 100 mm; custom thickness by design |
| Effective width | 980, 1160, 1180 or 1200 mm module, custom module by layout |
| Metal skin | 0.4-0.8 mm pre-painted steel, stainless steel or functional coated sheet |
| Surface options | PE, HDP, PVDF, antistatic, antibacterial or conductive coating by project |
| Application rooms | Pharmaceutical rooms, laboratories, medical-device workshops and fire-conscious cleanroom partitions |
| Frame system | Galvanized steel keel with reinforced perimeter and corners |
| Core build-up | Glass magnesium board layer combined with rock wool mineral core |
| Joint form | Aluminum connector or sealed cleanroom joint |
| Main advantage | Rigid board support plus mineral fiber fire performance |
| Order information | Panel drawings, fire requirement, opening positions, surface coating and accessory list |
Glass magnesium rock wool handmade cleanroom panel combines a board-type mineral layer with rock wool insulation. It is designed for custom cleanroom walls that need both reinforced panel fabrication and a stronger core specification than a simple foam board.
The panel is often used where fire strategy, wall rigidity and custom openings all matter. It can be coordinated with flush doors, observation windows, pass boxes and modular ceilings as one enclosure package.
The glass magnesium board layer adds rigidity and helps the panel keep a clean plane, while rock wool contributes mineral fire behavior and acoustic damping. The sample opening shows the core so buyers can inspect the construction before ordering.
This build-up is useful when the cleanroom needs more performance than a basic handmade panel but still requires custom sizes and factory-prepared details.
Door openings, window positions, electrical boxes, return-air grilles and one-piece corners can be prepared during panel fabrication. This reduces on-site dust and helps keep the final room finish cleaner.
The panel schedule should be checked against the ceiling height, door swing, equipment clearance and installation sequence before production begins.
Common applications include pharmaceutical clean rooms, hospital laboratories, medical-device plants, sterile support rooms and industrial cleanroom partitions requiring a composite mineral core.
The board layer improves rigidity and the rock wool core supports mineral fire performance and acoustic damping. The combination is useful for custom cleanroom partitions.
Yes. Handmade production can prepare one-piece corners when the room geometry and corner dimensions are confirmed before fabrication.
Yes, it is normally heavier than foam-core panels. Support spacing, handling length and packing method should be reviewed.
Yes, embedded conduits and boxes can be prepared if final drawings are provided before production.
Select coating according to cleaning chemicals, abrasion risk and room function. Antibacterial, antistatic, conductive and stainless steel options are available.
