Welcome to Shandong Hihsteel Co. Ltd.

News & Blogs

How to Import Galvanized and PPGI Steel Coils From China Without Quality Risks

How to Import Galvanized and PPGI Steel Coils From China Without Quality Risks

Four Contract Clauses That Stop 95% of Chinese Steel Coil Disputes

Importing 100 metric tons of color-coated coils from Shandong or Tianjin can save your roofing business $15,000 per shipment, or cost you $40,000 if your purchase order leaves sloppy technical loopholes.

Never send a vague inquiry asking for ‘0.45mm blue PPGI.’ Lock four exact tolerances into your signed Proforma Invoice when sourcing galvanized and color-coated steel coils: first, define BMT (Base Metal Thickness) vs TCT (Total Coated Thickness) with a tight +/- 0.015mm tolerance; second, specify exact zinc/Al-Zn coating weight (e.g., Z180 or AZ150) rather than vague words like ‘commercial zinc’; third, state paint resin and exact microns (e.g., ‘HDP 25/7 um, >= 100 MEK double rubs, <= 2T bend’); and fourth, lock coil weight (3.5 to 5.0 MT per coil) and inner diameter (508mm) to match your factory’s decoiler mandrel.

Steel Coil Product Standard 6-Digit HS Code Key Specs to Lock in Contract Critical Pre-Shipment SGS Check
Hot-Dip Galvanized Coil (GI >=600mm) 7210.49 Grade (DX51D/S350GD), Zinc (Z100-Z275), Spangle Micrometer BMT/TCT, XRF zinc weight, white rust
Galvalume / Aluzinc Coil (GL >=600mm) 7210.61 AZ50 – AZ150, Anti-Finger Print (AFP) clear coat Al-Zn coating mass, AFP rub resistance, edge burr
Color-Coated Steel Coil (PPGI / PPGL) 7210.70 RAL color, PE/HDP/PVDF, Top/Back microns, T-Bend DFT paint microns, 100 MEK rubs, 2T bend, gloss
Corrugated Profiled Roofing Sheets 7210.41 / 7308.90 Effective cover width, wave profile, cut length Wave height tolerance, bundle strapping & film

EN 10204 3.1 Mill Test Certificate and Waterproof Barcode Tag

Verifying HS 7210 Codes, Anti-Dumping Rules, and Form E / CO Duty Relief

Customs clearance mistakes freeze containers at destination port and trigger painful daily demurrage fees.

Flat-rolled galvanized coils (width >= 600mm) clear under HS 7210.49, Galvalume coils under HS 7210.61, and prepainted PPGI/PPGL coils under HS 7210.70. Before placing an order, check with your local customs broker whether your country applies preferential zero-tariff trade agreements, such as RCEP Form E for ASEAN buyers, China-Chile or China-Peru FTA certificates for South America, or standard CCPIT Certificates of Origin, and confirm whether local anti-dumping quotas apply to specific coil widths or thicknesses. Always declare true FOB values; undervaluing steel invoices risks 50% to 100% customs seizure penalties.

Pre-Shipment SGS / BV Inspection and EN 10204 3.1 Mill Certificates

Before releasing your final balance or authorizing Letter of Credit (L/C) negotiation, hire an accredited third-party inspector (SGS, Bureau Veritas, or Intertek) to spend four hours on our mill floor. Inspectors randomly shear coil tails to verify micrometer thickness, zinc weight, T-bend adhesion, and four-layer seaworthy VCI export packaging right beside our internal quality control engineers, issuing an EN 10204 3.1 traceable Mill Test Certificate linked to every coil heat number.

T-Bend Paint Adhesion Test in QC Lab

Frequently Asked Questions (FAQ)

Q1: What is the minimum order quantity (MOQ) to import PPGI or GI coils directly from a Chinese mill?

A: Standard mill MOQ is 25 metric tons (one full 20GP container) per thickness, width, and RAL color. For popular stock colors (RAL 9002 white, RAL 5015 blue, RAL 3009 red), we can often mix 2 to 3 thicknesses in one 20GP.

Q2: Why are steel coils shipped in 20GP containers instead of 40HQ containers?

A: Steel coils are ultra-dense heavy cargo. A 20GP container reaches its maximum 26 to 28 metric ton road-and-vessel payload limit with just 5 to 7 coils, so paying extra freight for a 40HQ container gains zero extra tonnage.

Q3: What payment terms are standard for importing bulk steel coils from China?

A: Standard B2B terms are 30% T/T deposit upon contract signing with 70% balance against copy of Bill of Lading (or prior to loading after SGS inspection pass), or an irrevocable Letter of Credit (L/C at sight) from a tier-1 bank.

Q4: How do I check if a steel coil supplier is a real factory or a trading broker?

A: Ask for a live video walkthrough of the coating/slitting line and warehouse coil yard, verify the EN 10204 3.1 Mill Test Certificate header, and send an independent SGS inspector to witness loading at the factory gate.

Q5: What inner diameter (ID) do export GI and PPGI steel coils use?

A: The universal export standard inner diameter is 508mm (20 inches), fitting 99% of roll-forming decoilers worldwide; heavy industrial mills can also wind 610mm (24-inch) ID upon request.

WhatsApp